List Prices (effective May 1, 2013)

GFI Musical Products are distributed and sold only through our Dealer network.

These are the list prices for products manufactured by GFI. Dealers set their own retail prices which may or may not be less than what is listed here.

You can contact GFI directly with any left-handed/custom building inquiries.

 

PROFESSIONAL SERIES PEDAL STEEL GUITARS

"Ultra" Models

Features: Maple Die Board Bodies with Mica Style Finish, Brushed Aluminum Frame Finish with Baked Epoxy Clear or Gloss Black Coating, One Piece Key Head(s), 24 Inch Scale, 3 Raise and 2 Lower Changers with Stainless Steel Fingers, Adjustable Changer Springs, 7 Position Bell Cranks, Expandable Steel Crossrods, Deflection Minimizing Crossrod Center Brackets with Teflon Bushings, GFI II Pickups made by George "L" to GFI Specs (Other Pickups on Request), Hardshell Gray Carpet Covered Case, Denim Leg Bag.

Mica Color Choices: Red, Black, Blue, Maple, Vintage Wood. Additional Colors Available at an Additional Cost.

D-10 U Double Neck 10 String, 8 Pedals and 5 Knee Levers
$5150.00
S-10 P U Single Neck 10 String with Pad, 3 Pedals and 4 Knee Levers

$3600.00

S-10 U Single Neck 10 String, 3 Pedals and 4 Knee Levers

$3150.00

S-12 K U (Keyless only) Single Neck 12 String, 7 Pedals and 5 Knee Levers
$4250.00
S-12 P K U (Keyless only) Single Neck 12 String with Pad, 7 Pedals and 5 Knee Levers
$4500.00
     
Additional Pedal(s) or Knee Lever(s) At time of factory order, each add:
$175.00
 
GFI KEYLESS TUNING SYSTEM For 10 String "Ultra" models, per neck, add:
$195.00
     
Special Frame Color Gold Vein, add:
$160.00
     
Pedal / Knee Lever Kit For installation on an existing Ultra guitar (includes Crossrod Center Brackets)
$200.00
Pull Kits Includes all parts needed to add one pull to an existing steel
$15.00

 

"Expo" X1 Models

Features: Maple Die Board Bodies with Mica Style Finish, Aluminum Frame with Split Front Rail Design, Baked Epoxy Hammer Tone Gold Vein with Clear Protective Coating, One Piece Key Head(s), 24 Inch Scale, 3 Raise and 2 Lower Changers with Stainless Steel Changer Fingers, Adjustable Changer Springs, 7 Position Bell Cranks, Expandable Steel Crossrods, GFI III Pickups made by George "L" to GFI Specs, Hardshell Gray Carpet Covered Case, Denim Leg Bag.

Mica Color Choices: Red, Black, Blue, Maple, Vintage Wood (various combinations for split front rail available).

D-10 E X1 Double Neck 10 String, 8 Pedals and 4 Knee Levers
$4600.00
S-10 P E X1 Single Neck 10 String with a Pad, 3 Pedals and 4 Knee Levers
$3350.00
S-10 E X1 Single Neck 10 String, 3 Pedals and 4 Knee Levers
$2700.00
     
Additional Pedal(s) or Knee Lever(s) At time of factory order, each add:
$175.00
     
Pedal/Knee Lever Kit For installation on an existing Expo guitar
$200.00
Pull Kits Includes all parts needed to add one pull to an existing steel
$15.00

"Expo" Models

Features: Maple Die Board Bodies with Mica Style Finish, Aluminum Frame with Baked Epoxy Hammer Tone Gray Coating, One Piece Key Head(s), 24 Inch Scale, 3 Raise and 2 Lower Changers with Stainless Steel Changer Fingers, Adjustable Changer Springs, 7 Position Bell Cranks, Expandable Steel Crossrods, GFI II Pickups made by George "L" to GFI Specs, Hardshell Gray Carpet Covered Case, Denim Leg Bag.

Mica Color Choices: Red, Black, Blue, Maple, Vintage Wood.

D-10 E Double Neck 10 String, 8 Pedals and 4 Knee Levers
$4075.00
S-10 P E Single Neck 10 String with a Pad, 3 Pedals and 4 Knee Levers
$3150.00
S-10 E Single Neck 10 String, 3 Pedals and 4 Knee Levers
$2550.00
     
Additional Vertical Knee Lever At time of factory order, each add:
$175.00
     
Vertical Knee Lever Kit For installation on an existing Expo guitar
$200.00
Pull Kits Includes all parts needed to add one pull to an existing steel
$15.00

 

STUDENT SERIES PEDAL STEEL GUITARS

Features: Die Board Bodies with Mica Style Finish, Aluminum Frame with Baked Epoxy Hammertone Black Coating, 7 Position Bell Cranks, Aluminum Crossrods, GFI II Pickups made by George "L" to GFI Specs.

Mica Color Choices: Red, Black, Blue, Maple.

S-10 SM Single Neck 10 String, 3 Pedals and 2 Knee Levers (3 or 4 knee levers available as an additional cost option)
$1250.00
     
Hardshell Gray Carpet Covered Case At time of factory order, add:
$135.00
Additional Knee Levers Up to 4 total, at time of factory order, each add:
$135.00
     
Pedal / Knee Lever Kits For installation on an existing Student Model guitar
$165.00

 

 

KARI-ALL STORAGE SEATS

Features: Gray Carpet Covered Box, Folding Aluminum Legs, Reinforced Corners, Black Vinyl Covered Top with 3 Tear Drop type Hinges and 2 Heavy Duty Case Latches.

Standard Model
$250.00
Backrest Model  
$325.00
 
Options:  
Black Vinyl Covered Box Available at no extra charge
Cloth Top add:
$20.00

 

PICKUPS

Made by George "L" to GFI specifications.

GFI-II Standard equipment on all GFI 10 string pedal steel guitars (except Expo X1 Models)
 
GFI-I Available as a no cost option for new orders of all GFI 10 string models
GFI-III Standard equipment on Expo X1 models and available as a no cost option for new orders of all other GFI 10 string Professional Models
     
Purchase price for any of the above pickups
$150.00
Purchase price for any of the above pickups As a replacement for an existing GFI pedal steel guitar
$95.00

 

Back to Top